The all-new SIC Raptor wing has been designed and rigorously tested by the team on Maui and Europe. Working in collaboration with sister company CORE Kiteboarding, a leader in kite design and technology, SIC is proud to introduce this series of performance wings.
Thewing’sleadingedgeutilizesourultra-rigid,non-stretch,ExoTex® Dacron,whichincorporatesauniquethreadstructureandemulsion(protectivecoating)processthat allows for a higher-pressure airframe and substantially increases tube strength and rigidity. The non-stretch Dacron improves airflow, flight stability and prevents seam bulging on the leading edge. Expect snappy turns, explosive lift, and smooth sailing upwind.
Our industry-leading, CORETEX® TRIPLE RIPSTOP canopy materials was developed by CORE Kiteboarding and is only available on the SIC Raptor wings. This high- performance fabric is protected and strengthened with a unique coating process. CORETEX® sets the standard in breaking strength, tear resistance, UV protection, elongation, and overall durability. Feel the tight, crisp signature only a CORETEX® built wing delivers.
The low aspect ratio of the wing provides tremendous power and due to the shorter wingspan, it reduces the chance of your wing tip dragging in the water when powering up, tacking, jibing and board touch-downs.
The Raptor wing uses an in-flow panel connecting the canopy with the control strut, ensuring that the wing maintains the most efficient aerodynamic profile during acceleration and cruising speed.
The web handle loops help maintain control, trim, and comfort.
The RUSH-AIR valve system enables you to quickly inflate the wing to the requested inflation pressure with little effort as well as allows you to deflate the wing in case of pressure adjustment or when you want to pack up the wing.
• In-flow panel design
• ExoTex® Dacron leading-edge and control strut • CORETEX® TRIPLE RIPSTOP canopy
• Web control handle loops
• Trailing edge battens to stabilize leach
• Windowless design for max. performance
• 2x RUSH-AIR inflation/deflation valves
• Wrist leash
• Carry backpack
• Repair kit
• 3.0m2, 4.0m2, 5.0m2, 6.0m2, 7.0m2
The large diameter inflation valves allow a maximized airflow with very little resistance. In combination with the high-quality, dual-action pump, filling your wing takes a matter of only minutes. The pump hose connects directly to the valve. No, nozzles are needed. It has an automatic airflow reflex membrane eliminating any loss in air pressure when detaching the pump. The valve cap is easy and secure, also helping to maintain the air pressure. When delating, simply unscrew the whole valve, and the wings will deflate in an instant.
Two valves have their advantages: The leading edge and control strut are inflated by two independent valves. This allows you to vary the inflation pressure in each bladder to fine tune the wing according to the conditions. In lighter winds, a little less pressure in the LE (6-7 psi) can help with wing pumping efficiency. When inflated 8 psi, you will have better high-wind control and wing stability. The control strut should always be pumped to 8 psi to tension the canopy sufficiently to have a rigid boom.